Mon - Fri 10:00 - 7:00 / Sat - Sun 10:00 -5:00

4603 Library Rd, Bethel Park, PA 15102

Custom Beretta Form Submitted

Custom Beretta Form Submitted

Pittsburgh Area Gunsmithing

Thank you for trusting Allegheny Arms and Gun Works with your gunsmithing needs. Once your project has been received and evaluated by our staff we will contact you with any changes with your estimated total. Additionally should we find anything that may cause a delay in completion of your project, we will let you know at the earliest time.

Best Prices

Best retail prices on the hardest to get items

Earn Points

Earn store credit with no expiration

Protection Plans

Lifetime warranties available on all new & used firearms

Community Education

Let us connect you with an instructor that fits your needs

alleghenyarms

We've been busy! Here are just a few highlights of

We've been busy! Here are just a few highlights of 9 solid days of barrel work, much of which was @aesuppressors profiling and brake & collar installs.

1&2. Proof barrel for a AI we got hooked up for an AEM5-30 with a new 5/8-24 muzzle brake and integral shoulder.

3. Noveske 14.5" we profiled for a custom collar and @spikes_tactical flash hider. We also shortened and opened up the @laruetactical rail for the included switchblock.

4. Profiled this barrel and made a custom small diameter collar for a Allen Engineering M4.

5. Colt M4 barrel needed turned and reparkerized to allow the installation of a M4 3 piece collar.

6. FN rifle length barrel was cut to ~16.5", threaded, and one of our own tapered gas blocks installed for a semi-RECCE build.

These were all a TON of fun to get done but now it's on to other projects!!

Another @aesuppressors build on its way back home.

Another @aesuppressors build on its way back home. This is a Colt 11.5" upper we mated a custom collar to and removed the bayo lug. Managed to get 9.3 turns on this AEM4 without any additional shims on the brake. Looks great and should give the customer many years of sold service!

Here's one our guys did a while ago for a local cu

Here's one our guys did a while ago for a local customer. Ruger American in .300blk. Cut to 9" and re-threaded 5/8-24 for a SiCo Omega300. Topped off with a Burris XTR, Magpul bipod and Glades Armory extended bolt handle. The stock was also cut down and blended to look factory.

Trimmed this barrel and mag tube to 12", adjusted

Trimmed this barrel and mag tube to 12", adjusted the length of the @rangerpointprecision rail accordingly and added a ported 3 lug. The rifle ended up as a 5+1 .357 or 6+1 .38 special. Shoots as good as it looks!

Modifying a @czusafirearms Trail stock in .300BLK

Modifying a @czusafirearms Trail stock in .300BLK for a shorter stop point. The OEM length was a little too long for the customer so we modified the apparatus.

Got a @coltfirearms 6940 in for some barrel work a

Got a @coltfirearms 6940 in for some barrel work and since barrel nut tools are literally unobtanium we had to make one.

Load More Follow on Instagram

Allegheny Arms
& Gun Works

Address

4603 Library Rd Suite 170

Bethel Park, PA 15102

Say Hello

Send us a message

Socials

Newsletter

Allegheny Arms & Gun Works

©

2024.

All Rights Reserved.