Gunsmith Pricing

Pittsburgh Area Gunsmithing

Allegheny Arms is a full service firearms repair and custom shop. Our professional gunsmiths have over 30 years in the industry and are ready and willing to help you get the most out of your firearms. Whether it is a simple repair to your hunting rifle, or a full custom race gun, AAGW can help make your firearm dreams into reality.

Company

This field is for validation purposes and should be left unchanged.

General Services

General Shop Labor

Price: $75.00

Individual job not listed.

Drill and Tap

Price: $25.00

$25 per hole

Stock Work

Grind to Fit Recoil Pad Installation

Price: $55.00

$55 +pad

Install Sling Swivel Set

Price: $35.00

$35 +parts

Glass Bed Action (Recoil Lug & Chamber Pad)

Price: $150.00

$150 and up

Stock Repairs

Price: $75.00

Hourly from $75

Barrel Work

Fit New Pistol Barrel

Price: $100.00

Recrown Barrel

Price: $55.00

Thread BBL From

Price: $125.00

Fabricate Custom Thread Protector

Price: $75.00

Polish Feed Ramp

Price: $25.00

Cut Down SxS, Resolder Center Rib

Price: $120.00

Allen Engineering / Otter Creek

AE M4 3 Piece Collar Install

Price: $75.00

Pricing shown is for the EXACT service listed. As these mount systems are barrel specific, additional charges may apply.

Muzzle Device & Collar Install

Price: $30.00

Pricing shown is for the EXACT service listed. As these mount systems are barrel specific, additional charges may apply.

Muzzle device & AGW Tapered Gas Block Install (Includes Cross Drill & Pin)

Price: $65.00

Pricing shown is for the EXACT service listed. As these mount systems are barrel specific, additional charges may apply.

Fabricate Custom Collar

Price: $80.00

Pricing shown is for the EXACT service listed. As these mount systems are barrel specific, additional charges may apply.

Machine Barrel for OPS/AE/OCL Collar

Price: $125.00

Pricing shown is for the EXACT service listed. As these mount systems are barrel specific, additional charges may apply"

Engraving

NFA Engraving

Price: $55.00

Fire Control Engraving

Price: $40.00

Special Text or Logos

Price: $60.00

AR Pattern Work

Complete Assembly of AR Pattern Parts Kit

Price: $75.00

GI style parts only (FSB taper pinning not included)

AR Pattern Work (Upper Receiver)

Remove / Install Colt 6940 Pattern Barrel

Price: $40.00

Only $40

Complete Upper Assembly GI Parts

Price: $50.00

Including headspace (FSB taper pinning not included)

Complete Upper Assembly Match Parts

Price: $75.00

Including headspace (FSB taper pinning not included)

Install Barrel Only On to Stripped Receiver

Price: $25.00

Install Free Float Handguard

Price: $40.00

Replace Barrel on Complete Upper & Verify Headspace

Price: $45.00

Verify Headspace Only

Price: $10.00

Install Gas Block

Price: $45.00

Includes barrel dimpling.

Modify Sight Tower; Remove A-Frame, Bayo Lug, Swivel & Re-Park

Price: $75.00

Cross Drill and Pin Gas Block

Price: $45.00

Single pin.

Pin and Weld Muzzle Device

Price: $50.00

Remove Pinned & Welded Muzzle Device

Price: $50.00

Install or Replace Non-Indexed Muzzle Device

Price: $15.00

Install Indexed Muzzle Device

Price: $25.00

Most muzzle brakes.

Drill for and Install Taper Pinned FSB

Price: $120.00

FSB & pins not included.

Cut, Crown, and Thread Barrel

Price: $125.00

Open Gas Port

Price: $25.00

Cut Flats For PRI Front Sight Base

Price: $45.00

AR Pattern Work (Lower Receiver)

Complete Lower Receiver Assembly

Price: $35.00

Trigger Swap Only

Price: $20.00

Change Buttstock Tube

Price: $15.00

Stake Castle Nut Only

Price: $10.00

Install Fire Control Group Only

Price: $15.00

Drill Colt Lower for Front Pin Detent & Spring

Price: $75.00

Modify Colt Sear Block for Standard Carrier & Trigger

Price: $100.00

Sight Work

Cut Front Dovetail

Price: $75.00

Cut Rear Novak Dovetail

Price: $150.00

Install Sights Into Existing Dovetails

Price: $30.00

Mount and Boresight Pistol RDS

Price: $30.00

General Scope Mounting

Price: $45.00

Boresight

Price: $20.00

Frame Work (Polymer Frame Pistols)

Single Trigger Guard Undercut

Price: $25.00

Double Trigger Guard Undercut

Price: $50.00

Stipple Frame Grip Area

Price: $200.00

Cut in and Stipple Thumb Rest "Gas Pedal"

Price: $25.00

Remove Finger Grooves

Price: $25.00

Frame Work (Metal Frame Pistols)

Bevel Magazine Well

Price: $135.00

Dehorn Pistol

Price: $75.00

Countersink Mag / Slide Release

Price: $45.00

Hand Checker Front or Rear of Frame

Price: $300.00

Slide Work

Fit slide

Price: $175.00

Cut Cocking Serrations

Price: $85.00

Serrate Slide Top

Price: $100.00

French Cut Slide

Price: $75.00

Lower and Flare Ejection Port

Price: $75.00

Trigger Work

Trigger Job

Price: $100.00

Install and tune customer supplied trigger kit.

Fit Thumb Safety

Price: $85.00

Fit Grip Safety

Price: $250.00

Bob Hammer

Price: $75.00

Finishing

Hot Tank Blue

Price: $250.00

Base price only; does not include finish prep

Spec+ Type 3 Hardcoat Pistol Frame

Price: $125.00

Cerakote Slide & Small Parts

Price: $150.00

Single color.

Parkerize Slide & Small Parts

Price: $100.00

Nickel Boron Slide Only

Price: $225.00

Nickel Boron Frame Only

Price: $275.00

Steel frames only.

Nickel Boron Small Parts Only

Price: $30.00

Minimum per part.

Nickel Boron3 Complete Pistol

Price: $475.00

All steel firearms.

Cerakote Complete Pistol

Price: $225.00

Single color.

Cerakote Slide Only

Price: $95.00

Single color.

Cerakote Frame Only

Price: $165.00

Single color, non-aluminum frames.

Spec+ Type 3 Hardcoat Pistol Frame

Price: $125.00

Parkerize Complete Pistol

Price: $175.00

Parkerize Slide Only

Price: $75.00

Parkerize Frame Only

Price: $125.00

Parkerize Rifle or Shotgun

Price: $250.00

Custom Packages

Deep cleaning

Price: $60.00

Detail strip and deep clean only.

Standard Service & Reliability Package

Price: $95.00

Detail strip and deep clean, full safety inspection, replacement of worn springs, lubrication to factory standards, high polish feed ramp if necessary.

HK USC to UMP Conversion

Price: $300.00

Modify Customer Supplied UMP lower to semi and fit to USC, Mill (5) cooling slots into USC receiver, Mill USC magazine Well to UMP Spec, Dye older grey USC to Black*, Cut/Crown/Thread OEM .45acp Barrel .578x28, NFA compliant engraving.

Customer Info

Name(Required)

Email(Required)

Phone

Address(Required)

Make/Model(Required)

Serial Number(Required)

Other Notes

EST Total

This is an estimate for your custom work. While prices listed are generally accurate for most projects, the final costs including shipping, etc. will be determined upon completion of the requested work.

Required Customer Acknowledgements

Hardcopy Acknowledgment(Required)

I acknowledge that if I ship my order into Allegheny Gun Works that I am responsible for including a completed hard copy of their smithing order with the package. If I fail to include a copy of the order it may result in the package being returned at my own expense.

Includes Acknowledgment(Required)

I acknowledge to only include necessary parts and accessories for the completion of work.

Extras Acknowledgement(Required)

I acknowledge that I must remove any unnecessary accessories to include, but not limited to; slings, cases, lights, etc...

Estimate Acknowledgement(Required)

I acknowledge that all items on the order are estimates and may fluctuate depending on the work.

Communication Acknowledgement(Required)

I acknowledge that if work is still within the originally quoted time frame for completion, gunsmiths cannot reply to inquiries about updates.

Gunsmith Pricing